Public report sample. Retained results from one dairy delivery, with local paths and source files omitted. Read the explanation.
Scripted checks
Confirmed failures, warnings and missing evidence stay separate. No-applicable-subjects is not a passed test.
| Check | Area | Basis | Result | Policy | Subjects | Finding and evidence |
|---|---|---|---|---|---|---|
| usdValidation:CompositionErrorTestusd.00 | geometry | General | PASS | Required | candidate: 1; assessed: 1; pass: 1; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0stage-validator invocations | Selected native OpenUSD validators executed.Targets, measurements and source{
"targets": {
"validators": [
"usdValidation:CompositionErrorTest"
],
"warnings_as_failures": false
},
"observed": {},
"source": {
"provided_by": "unrecorded",
"reference": "No specification source recorded"
},
"evidence_pointer": "/checks/1"
} |
| usdValidation:StageMetadataCheckerusd.01 | geometry | General | PASS | Required | candidate: 1; assessed: 1; pass: 1; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0stage-validator invocations | Selected native OpenUSD validators executed.Targets, measurements and source{
"targets": {
"validators": [
"usdValidation:StageMetadataChecker"
],
"warnings_as_failures": false
},
"observed": {},
"source": {
"provided_by": "unrecorded",
"reference": "No specification source recorded"
},
"evidence_pointer": "/checks/2"
} |
| usdGeomValidators:StageMetadataCheckerusd.02 | geometry | General | PASS | Required | candidate: 1; assessed: 1; pass: 1; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0stage-validator invocations | Selected native OpenUSD validators executed.Targets, measurements and source{
"targets": {
"validators": [
"usdGeomValidators:StageMetadataChecker"
],
"warnings_as_failures": false
},
"observed": {},
"source": {
"provided_by": "unrecorded",
"reference": "No specification source recorded"
},
"evidence_pointer": "/checks/3"
} |
| usdGeomValidators:EncapsulationCheckerusd.03 | geometry | General | PASS | Required | candidate: 1; assessed: 1; pass: 1; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0stage-validator invocations | Selected native OpenUSD validators executed.Targets, measurements and source{
"targets": {
"validators": [
"usdGeomValidators:EncapsulationChecker"
],
"warnings_as_failures": false
},
"observed": {},
"source": {
"provided_by": "unrecorded",
"reference": "No specification source recorded"
},
"evidence_pointer": "/checks/4"
} |
| usdGeomValidators:SubsetParentIsImageableusd.04 | geometry | General | PASS | Required | candidate: 1; assessed: 1; pass: 1; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0stage-validator invocations | Selected native OpenUSD validators executed.Targets, measurements and source{
"targets": {
"validators": [
"usdGeomValidators:SubsetParentIsImageable"
],
"warnings_as_failures": false
},
"observed": {},
"source": {
"provided_by": "unrecorded",
"reference": "No specification source recorded"
},
"evidence_pointer": "/checks/5"
} |
| usdGeomValidators:SubsetFamiliesusd.05 | geometry | General | PASS | Required | candidate: 1; assessed: 1; pass: 1; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0stage-validator invocations | Selected native OpenUSD validators executed.Targets, measurements and source{
"targets": {
"validators": [
"usdGeomValidators:SubsetFamilies"
],
"warnings_as_failures": false
},
"observed": {},
"source": {
"provided_by": "unrecorded",
"reference": "No specification source recorded"
},
"evidence_pointer": "/checks/6"
} |
| usdShadeValidators:MaterialBindingRelationshipsusd.06 | materials | General | PASS | Required | candidate: 1; assessed: 1; pass: 1; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0stage-validator invocations | Selected native OpenUSD validators executed.Targets, measurements and source{
"targets": {
"validators": [
"usdShadeValidators:MaterialBindingRelationships"
],
"warnings_as_failures": false
},
"observed": {},
"source": {
"provided_by": "unrecorded",
"reference": "No specification source recorded"
},
"evidence_pointer": "/checks/7"
} |
| usdShadeValidators:MaterialBindingApiAppliedValidatorusd.07 | materials | General | PASS | Required | candidate: 1; assessed: 1; pass: 1; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0stage-validator invocations | Selected native OpenUSD validators executed.Targets, measurements and source{
"targets": {
"validators": [
"usdShadeValidators:MaterialBindingApiAppliedValidator"
],
"warnings_as_failures": false
},
"observed": {},
"source": {
"provided_by": "unrecorded",
"reference": "No specification source recorded"
},
"evidence_pointer": "/checks/8"
} |
| usdShadeValidators:MaterialBindingCollectionValidatorusd.08 | materials | General | PASS | Required | candidate: 1; assessed: 1; pass: 1; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0stage-validator invocations | Selected native OpenUSD validators executed.Targets, measurements and source{
"targets": {
"validators": [
"usdShadeValidators:MaterialBindingCollectionValidator"
],
"warnings_as_failures": false
},
"observed": {},
"source": {
"provided_by": "unrecorded",
"reference": "No specification source recorded"
},
"evidence_pointer": "/checks/9"
} |
| usdShadeValidators:SubsetMaterialBindFamilyNameusd.09 | materials | General | PASS | Required | candidate: 1; assessed: 1; pass: 1; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0stage-validator invocations | Selected native OpenUSD validators executed.Targets, measurements and source{
"targets": {
"validators": [
"usdShadeValidators:SubsetMaterialBindFamilyName"
],
"warnings_as_failures": false
},
"observed": {},
"source": {
"provided_by": "unrecorded",
"reference": "No specification source recorded"
},
"evidence_pointer": "/checks/10"
} |
| usdShadeValidators:SubsetsMaterialBindFamilyusd.10 | materials | General | PASS | Required | candidate: 1; assessed: 1; pass: 1; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0stage-validator invocations | Selected native OpenUSD validators executed.Targets, measurements and source{
"targets": {
"validators": [
"usdShadeValidators:SubsetsMaterialBindFamily"
],
"warnings_as_failures": false
},
"observed": {},
"source": {
"provided_by": "unrecorded",
"reference": "No specification source recorded"
},
"evidence_pointer": "/checks/11"
} |
| usdShadeValidators:EncapsulationRulesValidatorusd.11 | materials | General | PASS | Required | candidate: 1; assessed: 1; pass: 1; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0stage-validator invocations | Selected native OpenUSD validators executed.Targets, measurements and source{
"targets": {
"validators": [
"usdShadeValidators:EncapsulationRulesValidator"
],
"warnings_as_failures": false
},
"observed": {},
"source": {
"provided_by": "unrecorded",
"reference": "No specification source recorded"
},
"evidence_pointer": "/checks/12"
} |
| usdUtilsValidators:MissingReferenceValidatorusd.12 | materials | General | PASS | Required | candidate: 1; assessed: 1; pass: 1; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0stage-validator invocations | Selected native OpenUSD validators executed.Targets, measurements and source{
"targets": {
"validators": [
"usdUtilsValidators:MissingReferenceValidator"
],
"warnings_as_failures": false
},
"observed": {},
"source": {
"provided_by": "unrecorded",
"reference": "No specification source recorded"
},
"evidence_pointer": "/checks/13"
} |
| usdPhysicsValidators:RigidBodyCheckerusd.13 | physics | General | NO_APPLICABLE_SUBJECTS | Required | candidate: 0; assessed: 0; pass: 0; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0rigid_bodies | Selected native OpenUSD validators executed.Targets, measurements and source{
"targets": {
"validators": [
"usdPhysicsValidators:RigidBodyChecker"
],
"warnings_as_failures": false
},
"observed": {},
"source": {
"provided_by": "unrecorded",
"reference": "No specification source recorded"
},
"evidence_pointer": "/checks/14"
} |
| usdPhysicsValidators:ColliderCheckerusd.14 | physics | General | NO_APPLICABLE_SUBJECTS | Required | candidate: 0; assessed: 0; pass: 0; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0colliders | Selected native OpenUSD validators executed.Targets, measurements and source{
"targets": {
"validators": [
"usdPhysicsValidators:ColliderChecker"
],
"warnings_as_failures": false
},
"observed": {},
"source": {
"provided_by": "unrecorded",
"reference": "No specification source recorded"
},
"evidence_pointer": "/checks/15"
} |
| usdPhysicsValidators:PhysicsJointCheckerusd.15 | physics | General | NO_APPLICABLE_SUBJECTS | Required | candidate: 0; assessed: 0; pass: 0; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0joints | Selected native OpenUSD validators executed.Targets, measurements and source{
"targets": {
"validators": [
"usdPhysicsValidators:PhysicsJointChecker"
],
"warnings_as_failures": false
},
"observed": {},
"source": {
"provided_by": "unrecorded",
"reference": "No specification source recorded"
},
"evidence_pointer": "/checks/16"
} |
| usdPhysicsValidators:ArticulationCheckerusd.16 | physics | General | PASS | Required | candidate: 1; assessed: 1; pass: 1; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0stage-validator invocations | Selected native OpenUSD validators executed.Targets, measurements and source{
"targets": {
"validators": [
"usdPhysicsValidators:ArticulationChecker"
],
"warnings_as_failures": false
},
"observed": {},
"source": {
"provided_by": "unrecorded",
"reference": "No specification source recorded"
},
"evidence_pointer": "/checks/17"
} |
| ValidateTopologyCheckernv.00 | geometry | General | PASS | Required | candidate: 1105; assessed: 1105; pass: 1105; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0prim-rule evaluations | Selected NVIDIA Asset Validator rules executed without invoking fixers.Targets, measurements and source{
"targets": {
"rules": [
"ValidateTopologyChecker"
],
"warnings_as_failures": false
},
"observed": {},
"source": {
"provided_by": "unrecorded",
"reference": "No specification source recorded"
},
"evidence_pointer": "/checks/18"
} |
| ExtentsCheckernv.01 | geometry | General | PASS | Required | candidate: 1125; assessed: 1125; pass: 1125; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0prim-rule evaluations | Selected NVIDIA Asset Validator rules executed without invoking fixers.Targets, measurements and source{
"targets": {
"rules": [
"ExtentsChecker"
],
"warnings_as_failures": false
},
"observed": {},
"source": {
"provided_by": "unrecorded",
"reference": "No specification source recorded"
},
"evidence_pointer": "/checks/19"
} |
| NormalsValidCheckernv.02 | geometry | General | PASS | Required | candidate: 1105; assessed: 1105; pass: 1105; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0prim-rule evaluations | Selected NVIDIA Asset Validator rules executed without invoking fixers.Targets, measurements and source{
"targets": {
"rules": [
"NormalsValidChecker"
],
"warnings_as_failures": false
},
"observed": {},
"source": {
"provided_by": "unrecorded",
"reference": "No specification source recorded"
},
"evidence_pointer": "/checks/20"
} |
| NormalsExistCheckernv.03 | geometry | General | PASS | Required | candidate: 1105; assessed: 1105; pass: 1105; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0prim-rule evaluations | Selected NVIDIA Asset Validator rules executed without invoking fixers.Targets, measurements and source{
"targets": {
"rules": [
"NormalsExistChecker"
],
"warnings_as_failures": false
},
"observed": {},
"source": {
"provided_by": "unrecorded",
"reference": "No specification source recorded"
},
"evidence_pointer": "/checks/21"
} |
| NormalsWindingsCheckernv.04 | geometry | General | PASS | Required | candidate: 1105; assessed: 1105; pass: 1105; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0prim-rule evaluations | Selected NVIDIA Asset Validator rules executed without invoking fixers.Targets, measurements and source{
"targets": {
"rules": [
"NormalsWindingsChecker"
],
"warnings_as_failures": false
},
"observed": {},
"source": {
"provided_by": "unrecorded",
"reference": "No specification source recorded"
},
"evidence_pointer": "/checks/22"
} |
| ZeroAreaFaceCheckernv.05 | geometry | General | PASS | Required | candidate: 1105; assessed: 1105; pass: 1105; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0prim-rule evaluations | Selected NVIDIA Asset Validator rules executed without invoking fixers.Targets, measurements and source{
"targets": {
"rules": [
"ZeroAreaFaceChecker"
],
"warnings_as_failures": false
},
"observed": {},
"source": {
"provided_by": "unrecorded",
"reference": "No specification source recorded"
},
"evidence_pointer": "/checks/23"
} |
| UsdDanglingMaterialBindingnv.06 | materials | General | PASS | Required | candidate: 1105; assessed: 1105; pass: 1105; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0prim-rule evaluations | Selected NVIDIA Asset Validator rules executed without invoking fixers.Targets, measurements and source{
"targets": {
"rules": [
"UsdDanglingMaterialBinding"
],
"warnings_as_failures": false
},
"observed": {},
"source": {
"provided_by": "unrecorded",
"reference": "No specification source recorded"
},
"evidence_pointer": "/checks/24"
} |
| Referenced local files are presentaudit.files | delivery | General | PASS | Required | candidate: 99; assessed: 99; pass: 99; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0unique external files | Checked external file availability.Targets, measurements and source{
"targets": {},
"observed": {},
"source": {
"provided_by": "unrecorded",
"reference": "No specification source recorded"
},
"evidence_pointer": "/checks/25"
} |
| Referenced images can be decodedaudit.textures | textures | General | PASS | Required | candidate: 99; assessed: 99; pass: 99; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0unique image files | Checked discovered image dependencies.Targets, measurements and source{
"targets": {
"max_bytes": 33554432,
"max_pixels": 16000000
},
"observed": {},
"source": {
"provided_by": "unrecorded",
"reference": "No specification source recorded"
},
"evidence_pointer": "/checks/26"
} |
| Saved transform animation has usable timing and finite valuesaudit.authored_motion | motion | General | NO_APPLICABLE_SUBJECTS | Required | candidate: 0; assessed: 0; pass: 0; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0animated transform prims | No time-sampled transform operations discovered.Targets, measurements and source{
"targets": {
"max_samples_per_prim": 4097,
"max_total_samples": 100000
},
"observed": {},
"source": {
"provided_by": "unrecorded",
"reference": "No specification source recorded"
},
"evidence_pointer": "/checks/27"
} |
| Authored stage settings match the briefspec.units | geometry | Human | PASS | Required | candidate: 2; assessed: 2; pass: 2; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0requirement comparisons | Explicit authored stage metadata targets; no inference from fallback values or geometryTargets, measurements and source{
"targets": {
"values": {
"upAxis": "Z",
"metersPerUnit": 1.0
},
"tolerance": 0
},
"observed": {},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/28"
} |
| Named group has the specified number of partsspec.groups | geometry | Human | PASS | Required | candidate: 1; assessed: 1; pass: 1; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0requirement comparisons | Count active defined direct children of one declared type; no dimensions or physical function claimTargets, measurements and source{
"targets": {
"parent": "/World",
"type": "Xform",
"count": 6
},
"observed": {},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/29"
} |
| Specified gap between named objectsspec.headroom.l-101.s1.a2_service | geometry | Human | PASS | Required | candidate: 1; assessed: 1; pass: 1; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0requirement comparisons | Directed gap between two world bounding boxes at one time; not collision, access, or safety certificationTargets, measurements and source{
"targets": {
"a": "/World/Annotations/Clearances/A2_service",
"b": "/World/Piping/RawMilk/L_101/Seg_01",
"axis": "z",
"time_code": 0,
"minimum_m": 0.0,
"tolerance_m": 0.0
},
"observed": {},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/30"
} |
| Specified gap between named objectsspec.headroom.l-103.s3.a3_west | geometry | Human | PASS | Required | candidate: 1; assessed: 1; pass: 1; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0requirement comparisons | Directed gap between two world bounding boxes at one time; not collision, access, or safety certificationTargets, measurements and source{
"targets": {
"a": "/World/Annotations/Clearances/A3_west",
"b": "/World/Piping/RawMilk/L_103/Seg_03",
"axis": "z",
"time_code": 0,
"minimum_m": 0.0,
"tolerance_m": 0.0
},
"observed": {},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/31"
} |
| Specified gap between named objectsspec.headroom.l-207.s4.a4_east | geometry | Human | PASS | Required | candidate: 1; assessed: 1; pass: 1; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0requirement comparisons | Directed gap between two world bounding boxes at one time; not collision, access, or safety certificationTargets, measurements and source{
"targets": {
"a": "/World/Annotations/Clearances/A4_east",
"b": "/World/Piping/SkimMilk/L_207/Seg_04",
"axis": "z",
"time_code": 0,
"minimum_m": 0.0,
"tolerance_m": 0.0
},
"observed": {},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/32"
} |
| Specified gap between named objectsspec.headroom.l-308.s2.a4_east | geometry | Human | PASS | Required | candidate: 1; assessed: 1; pass: 1; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0requirement comparisons | Directed gap between two world bounding boxes at one time; not collision, access, or safety certificationTargets, measurements and source{
"targets": {
"a": "/World/Annotations/Clearances/A4_east",
"b": "/World/Piping/Cream/L_308/Seg_02",
"axis": "z",
"time_code": 0,
"minimum_m": 0.0,
"tolerance_m": 0.0
},
"observed": {},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/33"
} |
| Specified gap between named objectsspec.headroom.l-411.s0.a2_service | geometry | Human | PASS | Required | candidate: 1; assessed: 1; pass: 1; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0requirement comparisons | Directed gap between two world bounding boxes at one time; not collision, access, or safety certificationTargets, measurements and source{
"targets": {
"a": "/World/Annotations/Clearances/A2_service",
"b": "/World/Piping/CIP/L_411/Seg_00",
"axis": "z",
"time_code": 0,
"minimum_m": 0.0,
"tolerance_m": 0.0
},
"observed": {},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/34"
} |
| Specified gap between named objectsspec.headroom.l-412.s0.a2_service | geometry | Human | PASS | Required | candidate: 1; assessed: 1; pass: 1; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0requirement comparisons | Directed gap between two world bounding boxes at one time; not collision, access, or safety certificationTargets, measurements and source{
"targets": {
"a": "/World/Annotations/Clearances/A2_service",
"b": "/World/Piping/CIP/L_412/Seg_00",
"axis": "z",
"time_code": 0,
"minimum_m": 0.0,
"tolerance_m": 0.0
},
"observed": {},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/35"
} |
| Specified gap between named objectsspec.headroom.l-413.s0.a2_service | geometry | Human | PASS | Required | candidate: 1; assessed: 1; pass: 1; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0requirement comparisons | Directed gap between two world bounding boxes at one time; not collision, access, or safety certificationTargets, measurements and source{
"targets": {
"a": "/World/Annotations/Clearances/A2_service",
"b": "/World/Piping/CIP/L_413/Seg_00",
"axis": "z",
"time_code": 0,
"minimum_m": 0.0,
"tolerance_m": 0.0
},
"observed": {},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/36"
} |
| Specified gap between named objectsspec.headroom.l-413.s0.a5_process | geometry | Human | PASS | Required | candidate: 1; assessed: 1; pass: 1; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0requirement comparisons | Directed gap between two world bounding boxes at one time; not collision, access, or safety certificationTargets, measurements and source{
"targets": {
"a": "/World/Annotations/Clearances/A5_process",
"b": "/World/Piping/CIP/L_413/Seg_00",
"axis": "z",
"time_code": 0,
"minimum_m": 0.0,
"tolerance_m": 0.0
},
"observed": {},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/37"
} |
| Specified gap between named objectsspec.headroom.l-414.s0.a2_service | geometry | Human | PASS | Required | candidate: 1; assessed: 1; pass: 1; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0requirement comparisons | Directed gap between two world bounding boxes at one time; not collision, access, or safety certificationTargets, measurements and source{
"targets": {
"a": "/World/Annotations/Clearances/A2_service",
"b": "/World/Piping/CIP/L_414/Seg_00",
"axis": "z",
"time_code": 0,
"minimum_m": 0.0,
"tolerance_m": 0.0
},
"observed": {},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/38"
} |
| Specified gap between named objectsspec.headroom.l-415.s0.a2_service | geometry | Human | PASS | Required | candidate: 1; assessed: 1; pass: 1; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0requirement comparisons | Directed gap between two world bounding boxes at one time; not collision, access, or safety certificationTargets, measurements and source{
"targets": {
"a": "/World/Annotations/Clearances/A2_service",
"b": "/World/Piping/CIP/L_415/Seg_00",
"axis": "z",
"time_code": 0,
"minimum_m": 0.0,
"tolerance_m": 0.0
},
"observed": {},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/39"
} |
| Specified gap between named objectsspec.headroom.l-416.s0.a2_service | geometry | Human | PASS | Required | candidate: 1; assessed: 1; pass: 1; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0requirement comparisons | Directed gap between two world bounding boxes at one time; not collision, access, or safety certificationTargets, measurements and source{
"targets": {
"a": "/World/Annotations/Clearances/A2_service",
"b": "/World/Piping/CIP/L_416/Seg_00",
"axis": "z",
"time_code": 0,
"minimum_m": 0.0,
"tolerance_m": 0.0
},
"observed": {},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/40"
} |
| Specified gap between named objectsspec.headroom.l-422.s1.a2_service | geometry | Human | PASS | Required | candidate: 1; assessed: 1; pass: 1; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0requirement comparisons | Directed gap between two world bounding boxes at one time; not collision, access, or safety certificationTargets, measurements and source{
"targets": {
"a": "/World/Annotations/Clearances/A2_service",
"b": "/World/Piping/CIP/L_422/Seg_01",
"axis": "z",
"time_code": 0,
"minimum_m": 0.0,
"tolerance_m": 0.0
},
"observed": {},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/41"
} |
| Specified gap between named objectsspec.headroom.l-423.s1.a2_service | geometry | Human | PASS | Required | candidate: 1; assessed: 1; pass: 1; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0requirement comparisons | Directed gap between two world bounding boxes at one time; not collision, access, or safety certificationTargets, measurements and source{
"targets": {
"a": "/World/Annotations/Clearances/A2_service",
"b": "/World/Piping/CIP/L_423/Seg_01",
"axis": "z",
"time_code": 0,
"minimum_m": 0.0,
"tolerance_m": 0.0
},
"observed": {},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/42"
} |
| Specified gap between named objectsspec.headroom.l-423.s1.a5_process | geometry | Human | PASS | Required | candidate: 1; assessed: 1; pass: 1; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0requirement comparisons | Directed gap between two world bounding boxes at one time; not collision, access, or safety certificationTargets, measurements and source{
"targets": {
"a": "/World/Annotations/Clearances/A5_process",
"b": "/World/Piping/CIP/L_423/Seg_01",
"axis": "z",
"time_code": 0,
"minimum_m": 0.0,
"tolerance_m": 0.0
},
"observed": {},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/43"
} |
| Specified gap between named objectsspec.headroom.l-424.s1.a2_service | geometry | Human | PASS | Required | candidate: 1; assessed: 1; pass: 1; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0requirement comparisons | Directed gap between two world bounding boxes at one time; not collision, access, or safety certificationTargets, measurements and source{
"targets": {
"a": "/World/Annotations/Clearances/A2_service",
"b": "/World/Piping/CIP/L_424/Seg_01",
"axis": "z",
"time_code": 0,
"minimum_m": 0.0,
"tolerance_m": 0.0
},
"observed": {},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/44"
} |
| Specified gap between named objectsspec.headroom.l-425.s1.a2_service | geometry | Human | PASS | Required | candidate: 1; assessed: 1; pass: 1; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0requirement comparisons | Directed gap between two world bounding boxes at one time; not collision, access, or safety certificationTargets, measurements and source{
"targets": {
"a": "/World/Annotations/Clearances/A2_service",
"b": "/World/Piping/CIP/L_425/Seg_01",
"axis": "z",
"time_code": 0,
"minimum_m": 0.0,
"tolerance_m": 0.0
},
"observed": {},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/45"
} |
| Specified gap between named objectsspec.headroom.l-501.s0.a2_service | geometry | Human | PASS | Required | candidate: 1; assessed: 1; pass: 1; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0requirement comparisons | Directed gap between two world bounding boxes at one time; not collision, access, or safety certificationTargets, measurements and source{
"targets": {
"a": "/World/Annotations/Clearances/A2_service",
"b": "/World/Piping/HotWater/L_501/Seg_00",
"axis": "z",
"time_code": 0,
"minimum_m": 0.0,
"tolerance_m": 0.0
},
"observed": {},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/46"
} |
| Specified gap between named objectsspec.headroom.l-501.s0.a5_process | geometry | Human | PASS | Required | candidate: 1; assessed: 1; pass: 1; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0requirement comparisons | Directed gap between two world bounding boxes at one time; not collision, access, or safety certificationTargets, measurements and source{
"targets": {
"a": "/World/Annotations/Clearances/A5_process",
"b": "/World/Piping/HotWater/L_501/Seg_00",
"axis": "z",
"time_code": 0,
"minimum_m": 0.0,
"tolerance_m": 0.0
},
"observed": {},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/47"
} |
| Specified gap between named objectsspec.headroom.l-502.s2.a2_service | geometry | Human | PASS | Required | candidate: 1; assessed: 1; pass: 1; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0requirement comparisons | Directed gap between two world bounding boxes at one time; not collision, access, or safety certificationTargets, measurements and source{
"targets": {
"a": "/World/Annotations/Clearances/A2_service",
"b": "/World/Piping/HotWater/L_502/Seg_02",
"axis": "z",
"time_code": 0,
"minimum_m": 0.0,
"tolerance_m": 0.0
},
"observed": {},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/48"
} |
| Specified gap between named objectsspec.headroom.l-502.s2.a5_process | geometry | Human | PASS | Required | candidate: 1; assessed: 1; pass: 1; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0requirement comparisons | Directed gap between two world bounding boxes at one time; not collision, access, or safety certificationTargets, measurements and source{
"targets": {
"a": "/World/Annotations/Clearances/A5_process",
"b": "/World/Piping/HotWater/L_502/Seg_02",
"axis": "z",
"time_code": 0,
"minimum_m": 0.0,
"tolerance_m": 0.0
},
"observed": {},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/49"
} |
| Specified gap between named objectsspec.headroom.l-511.s0.a2_service | geometry | Human | PASS | Required | candidate: 1; assessed: 1; pass: 1; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0requirement comparisons | Directed gap between two world bounding boxes at one time; not collision, access, or safety certificationTargets, measurements and source{
"targets": {
"a": "/World/Annotations/Clearances/A2_service",
"b": "/World/Piping/ChilledWater/L_511/Seg_00",
"axis": "z",
"time_code": 0,
"minimum_m": 0.0,
"tolerance_m": 0.0
},
"observed": {},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/50"
} |
| Specified gap between named objectsspec.headroom.l-511.s0.a5_process | geometry | Human | PASS | Required | candidate: 1; assessed: 1; pass: 1; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0requirement comparisons | Directed gap between two world bounding boxes at one time; not collision, access, or safety certificationTargets, measurements and source{
"targets": {
"a": "/World/Annotations/Clearances/A5_process",
"b": "/World/Piping/ChilledWater/L_511/Seg_00",
"axis": "z",
"time_code": 0,
"minimum_m": 0.0,
"tolerance_m": 0.0
},
"observed": {},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/51"
} |
| Specified gap between named objectsspec.headroom.l-512.s2.a2_service | geometry | Human | PASS | Required | candidate: 1; assessed: 1; pass: 1; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0requirement comparisons | Directed gap between two world bounding boxes at one time; not collision, access, or safety certificationTargets, measurements and source{
"targets": {
"a": "/World/Annotations/Clearances/A2_service",
"b": "/World/Piping/ChilledWater/L_512/Seg_02",
"axis": "z",
"time_code": 0,
"minimum_m": 0.0,
"tolerance_m": 0.0
},
"observed": {},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/52"
} |
| Specified gap between named objectsspec.headroom.l-512.s2.a5_process | geometry | Human | PASS | Required | candidate: 1; assessed: 1; pass: 1; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0requirement comparisons | Directed gap between two world bounding boxes at one time; not collision, access, or safety certificationTargets, measurements and source{
"targets": {
"a": "/World/Annotations/Clearances/A5_process",
"b": "/World/Piping/ChilledWater/L_512/Seg_02",
"axis": "z",
"time_code": 0,
"minimum_m": 0.0,
"tolerance_m": 0.0
},
"observed": {},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/53"
} |
| Specified gap between named objectsspec.headroom.l-503.s0.a2_service | geometry | Human | PASS | Required | candidate: 1; assessed: 1; pass: 1; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0requirement comparisons | Directed gap between two world bounding boxes at one time; not collision, access, or safety certificationTargets, measurements and source{
"targets": {
"a": "/World/Annotations/Clearances/A2_service",
"b": "/World/Piping/HotWater/L_503/Seg_00",
"axis": "z",
"time_code": 0,
"minimum_m": 0.0,
"tolerance_m": 0.0
},
"observed": {},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/54"
} |
| Specified gap between named objectsspec.headroom.l-504.s3.a2_service | geometry | Human | PASS | Required | candidate: 1; assessed: 1; pass: 1; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0requirement comparisons | Directed gap between two world bounding boxes at one time; not collision, access, or safety certificationTargets, measurements and source{
"targets": {
"a": "/World/Annotations/Clearances/A2_service",
"b": "/World/Piping/HotWater/L_504/Seg_03",
"axis": "z",
"time_code": 0,
"minimum_m": 0.0,
"tolerance_m": 0.0
},
"observed": {},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/55"
} |
| Specified gap between named objectsspec.headroom.l-513.s0.a2_service | geometry | Human | PASS | Required | candidate: 1; assessed: 1; pass: 1; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0requirement comparisons | Directed gap between two world bounding boxes at one time; not collision, access, or safety certificationTargets, measurements and source{
"targets": {
"a": "/World/Annotations/Clearances/A2_service",
"b": "/World/Piping/ChilledWater/L_513/Seg_00",
"axis": "z",
"time_code": 0,
"minimum_m": 0.0,
"tolerance_m": 0.0
},
"observed": {},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/56"
} |
| Specified gap between named objectsspec.headroom.l-514.s2.a2_service | geometry | Human | PASS | Required | candidate: 1; assessed: 1; pass: 1; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0requirement comparisons | Directed gap between two world bounding boxes at one time; not collision, access, or safety certificationTargets, measurements and source{
"targets": {
"a": "/World/Annotations/Clearances/A2_service",
"b": "/World/Piping/ChilledWater/L_514/Seg_02",
"axis": "z",
"time_code": 0,
"minimum_m": 0.0,
"tolerance_m": 0.0
},
"observed": {},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/57"
} |
| Specified gap between named objectsspec.headroom.l-521.s0.a2_service | geometry | Human | PASS | Required | candidate: 1; assessed: 1; pass: 1; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0requirement comparisons | Directed gap between two world bounding boxes at one time; not collision, access, or safety certificationTargets, measurements and source{
"targets": {
"a": "/World/Annotations/Clearances/A2_service",
"b": "/World/Piping/CompressedAir/L_521/Seg_00",
"axis": "z",
"time_code": 0,
"minimum_m": 0.0,
"tolerance_m": 0.0
},
"observed": {},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/58"
} |
| Specified gap between named objectsspec.headroom.l-521.s0.a5_process | geometry | Human | PASS | Required | candidate: 1; assessed: 1; pass: 1; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0requirement comparisons | Directed gap between two world bounding boxes at one time; not collision, access, or safety certificationTargets, measurements and source{
"targets": {
"a": "/World/Annotations/Clearances/A5_process",
"b": "/World/Piping/CompressedAir/L_521/Seg_00",
"axis": "z",
"time_code": 0,
"minimum_m": 0.0,
"tolerance_m": 0.0
},
"observed": {},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/59"
} |
| Specified gap between named objectsspec.headroom.l-522.s0.a2_service | geometry | Human | PASS | Required | candidate: 1; assessed: 1; pass: 1; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0requirement comparisons | Directed gap between two world bounding boxes at one time; not collision, access, or safety certificationTargets, measurements and source{
"targets": {
"a": "/World/Annotations/Clearances/A2_service",
"b": "/World/Piping/CompressedAir/L_522/Seg_00",
"axis": "z",
"time_code": 0,
"minimum_m": 0.0,
"tolerance_m": 0.0
},
"observed": {},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/60"
} |
| Specified gap between named objectsspec.env.x | geometry | Human | PASS | Required | candidate: 1; assessed: 1; pass: 1; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0requirement comparisons | Directed gap between two world bounding boxes at one time; not collision, access, or safety certificationTargets, measurements and source{
"targets": {
"a": "/World/Structure/Walls/West/Panels",
"b": "/World/Structure/Walls/East/Panels",
"axis": "x",
"time_code": 0,
"minimum_m": 24.0,
"tolerance_m": 0.0
},
"observed": {},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/61"
} |
| Specified gap between named objectsspec.env.y | geometry | Human | PASS | Required | candidate: 1; assessed: 1; pass: 1; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0requirement comparisons | Directed gap between two world bounding boxes at one time; not collision, access, or safety certificationTargets, measurements and source{
"targets": {
"a": "/World/Structure/Walls/South/Panels",
"b": "/World/Structure/Walls/North/Panels",
"axis": "y",
"time_code": 0,
"minimum_m": 16.0,
"tolerance_m": 0.0
},
"observed": {},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/62"
} |
| Specified gap between named objectsspec.env.z | geometry | Human | PASS | Required | candidate: 1; assessed: 1; pass: 1; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0requirement comparisons | Directed gap between two world bounding boxes at one time; not collision, access, or safety certificationTargets, measurements and source{
"targets": {
"a": "/World/Structure/Floor",
"b": "/World/Structure/Roof/Slab",
"axis": "z",
"time_code": 0,
"minimum_m": 6.0,
"tolerance_m": 0.0
},
"observed": {},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/63"
} |
| Specified gap between named objectsspec.fits.0 | geometry | Human | PASS | Required | candidate: 1; assessed: 1; pass: 1; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0requirement comparisons | Directed gap between two world bounding boxes at one time; not collision, access, or safety certificationTargets, measurements and source{
"targets": {
"a": "/World/Equipment/TK_101/AgitatorFanCowl",
"b": "/World/Structure/Roof/Slab",
"axis": "z",
"time_code": 0,
"minimum_m": 0.0,
"tolerance_m": 0.0
},
"observed": {},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/64"
} |
| Specified gap between named objectsspec.fits.1 | geometry | Human | PASS | Required | candidate: 1; assessed: 1; pass: 1; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0requirement comparisons | Directed gap between two world bounding boxes at one time; not collision, access, or safety certificationTargets, measurements and source{
"targets": {
"a": "/World/Equipment/TK_102/AgitatorFanCowl",
"b": "/World/Structure/Roof/Slab",
"axis": "z",
"time_code": 0,
"minimum_m": 0.0,
"tolerance_m": 0.0
},
"observed": {},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/65"
} |
| Specified gap between named objectsspec.fits.2 | geometry | Human | PASS | Required | candidate: 1; assessed: 1; pass: 1; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0requirement comparisons | Directed gap between two world bounding boxes at one time; not collision, access, or safety certificationTargets, measurements and source{
"targets": {
"a": "/World/Equipment/TK_301/AgitatorFanCowl",
"b": "/World/Structure/Roof/Slab",
"axis": "z",
"time_code": 0,
"minimum_m": 0.0,
"tolerance_m": 0.0
},
"observed": {},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/66"
} |
| Specified gap between named objectsspec.fits.3 | geometry | Human | PASS | Required | candidate: 1; assessed: 1; pass: 1; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0requirement comparisons | Directed gap between two world bounding boxes at one time; not collision, access, or safety certificationTargets, measurements and source{
"targets": {
"a": "/World/Equipment/TK_302/AgitatorFanCowl",
"b": "/World/Structure/Roof/Slab",
"axis": "z",
"time_code": 0,
"minimum_m": 0.0,
"tolerance_m": 0.0
},
"observed": {},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/67"
} |
| Specified gap between named objectsspec.fits.4 | geometry | Human | PASS | Required | candidate: 1; assessed: 1; pass: 1; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0requirement comparisons | Directed gap between two world bounding boxes at one time; not collision, access, or safety certificationTargets, measurements and source{
"targets": {
"a": "/World/Equipment/ACC_101/Handrails",
"b": "/World/Structure/Roof/Slab",
"axis": "z",
"time_code": 0,
"minimum_m": 0.0,
"tolerance_m": 0.0
},
"observed": {},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/68"
} |
| Specified gap between named objectsspec.fits.5 | geometry | Human | PASS | Required | candidate: 1; assessed: 1; pass: 1; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0requirement comparisons | Directed gap between two world bounding boxes at one time; not collision, access, or safety certificationTargets, measurements and source{
"targets": {
"a": "/World/Structure/CableTrays/Trays",
"b": "/World/Structure/Roof/Slab",
"axis": "z",
"time_code": 0,
"minimum_m": 0.0,
"tolerance_m": 0.0
},
"observed": {},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/69"
} |
| Specified gap between named objectsspec.fits.6 | geometry | Human | PASS | Required | candidate: 1; assessed: 1; pass: 1; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0requirement comparisons | Directed gap between two world bounding boxes at one time; not collision, access, or safety certificationTargets, measurements and source{
"targets": {
"a": "/World/Piping/CompressedAir/UTL_CA/Seg_00",
"b": "/World/Structure/Roof/Slab",
"axis": "z",
"time_code": 0,
"minimum_m": 0.0,
"tolerance_m": 0.0
},
"observed": {},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/70"
} |
| Named geometry matches specified size and centrespec.reserve.hx101 | geometry | Human | PASS | Required | candidate: 1; assessed: 1; pass: 1; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0requirement comparisons | Named Cube/Mesh world axis-aligned bounds at one time; no shape equivalence or topology claimTargets, measurements and source{
"targets": {
"path": "/World/Equipment/HX_101/SkidBaseFrame",
"time_code": 0,
"size_m": [
5.0,
3.0,
0.12
],
"tolerance_m": 0.05
},
"observed": {
"minimum_m": [
6.790000009536744,
3.1900000095367433,
0.0
],
"maximum_m": [
11.809999990463258,
6.209999990463257,
0.11999999731779099
]
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/71"
} |
| Named geometry matches specified size and centrespec.reserve.hx201 | geometry | Human | PASS | Required | candidate: 1; assessed: 1; pass: 1; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0requirement comparisons | Named Cube/Mesh world axis-aligned bounds at one time; no shape equivalence or topology claimTargets, measurements and source{
"targets": {
"path": "/World/Equipment/HX_201/SkidBaseFrame",
"time_code": 0,
"size_m": [
3.0,
2.0,
0.12
],
"tolerance_m": 0.05
},
"observed": {
"minimum_m": [
16.4,
8.5,
0.019999999552965164
],
"maximum_m": [
19.4,
10.5,
0.11999999731779099
]
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/72"
} |
| Named geometry matches specified size and centrespec.reserve.cip401 | geometry | Human | PASS | Required | candidate: 1; assessed: 1; pass: 1; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0requirement comparisons | Named Cube/Mesh world axis-aligned bounds at one time; no shape equivalence or topology claimTargets, measurements and source{
"targets": {
"path": "/World/Equipment/CIP_401/BaseFrame",
"time_code": 0,
"size_m": [
4.0,
3.0,
0.1
],
"tolerance_m": 0.05
},
"observed": {
"minimum_m": [
8.0,
12.8,
0.0
],
"maximum_m": [
12.0,
15.8,
0.10000000149011612
]
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/73"
} |
| Named attachment points stay within the specified gapspec.conn.l-101.start | motion | Human | PASS | Required | candidate: 2; assessed: 2; pass: 2; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0connection samples | Euclidean connection distance in metres compared at the recorded sample times only.Targets, measurements and source{
"targets": {
"a": {
"path": "/World/Piping/RawMilk/L_101/Seg_00",
"local_point": [
3.4000000000000004,
14.2,
2.1
]
},
"b": {
"path": "/World/Equipment/REC_101/Ports/OUT",
"local_point": [
0,
0,
0
]
},
"interval_s": [
0,
1
],
"segments": 1,
"schedule": "uniform",
"max_gap_m": 0.001
},
"observed": {
"maximum_sampled_gap_m": 0.0,
"max_gap_m": 0.001
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/74"
} |
| Named attachment points stay within the specified gapspec.conn.l-101.end | motion | Human | PASS | Required | candidate: 2; assessed: 2; pass: 2; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0connection samples | Euclidean connection distance in metres compared at the recorded sample times only.Targets, measurements and source{
"targets": {
"a": {
"path": "/World/Piping/RawMilk/L_101/Seg_04",
"local_point": [
3.1500000000000004,
4.9,
1.3
]
},
"b": {
"path": "/World/Equipment/TK_101/Ports/IN",
"local_point": [
0,
0,
0
]
},
"interval_s": [
0,
1
],
"segments": 1,
"schedule": "uniform",
"max_gap_m": 0.001
},
"observed": {
"maximum_sampled_gap_m": 0.0,
"max_gap_m": 0.001
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/75"
} |
| Named attachment points stay within the specified gapspec.conn.l-102.end | motion | Human | PASS | Required | candidate: 2; assessed: 2; pass: 2; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0connection samples | Euclidean connection distance in metres compared at the recorded sample times only.Targets, measurements and source{
"targets": {
"a": {
"path": "/World/Piping/RawMilk/L_102/Seg_00",
"local_point": [
3.1500000000000004,
8.4,
1.3
]
},
"b": {
"path": "/World/Equipment/TK_102/Ports/IN",
"local_point": [
0,
0,
0
]
},
"interval_s": [
0,
1
],
"segments": 1,
"schedule": "uniform",
"max_gap_m": 0.001
},
"observed": {
"maximum_sampled_gap_m": 0.0,
"max_gap_m": 0.001
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/76"
} |
| Named attachment points stay within the specified gapspec.conn.l-103.start | motion | Human | PASS | Required | candidate: 2; assessed: 2; pass: 2; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0connection samples | Euclidean connection distance in metres compared at the recorded sample times only.Targets, measurements and source{
"targets": {
"a": {
"path": "/World/Piping/RawMilk/L_103/Seg_00",
"local_point": [
2.0,
4.9,
0.5399999999999999
]
},
"b": {
"path": "/World/Equipment/TK_101/Ports/OUT",
"local_point": [
0,
0,
0
]
},
"interval_s": [
0,
1
],
"segments": 1,
"schedule": "uniform",
"max_gap_m": 0.001
},
"observed": {
"maximum_sampled_gap_m": 0.0,
"max_gap_m": 0.001
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/77"
} |
| Named attachment points stay within the specified gapspec.conn.l-103.end | motion | Human | PASS | Required | candidate: 2; assessed: 2; pass: 2; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0connection samples | Euclidean connection distance in metres compared at the recorded sample times only.Targets, measurements and source{
"targets": {
"a": {
"path": "/World/Piping/RawMilk/L_103/Seg_04",
"local_point": [
6.0328,
4.9,
1.670983267714152
]
},
"b": {
"path": "/World/Equipment/BT_101/Ports/IN_RAW",
"local_point": [
0,
0,
0
]
},
"interval_s": [
0,
1
],
"segments": 1,
"schedule": "uniform",
"max_gap_m": 0.001
},
"observed": {
"maximum_sampled_gap_m": 0.0,
"max_gap_m": 0.001
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/78"
} |
| Named attachment points stay within the specified gapspec.conn.l-104.start | motion | Human | PASS | Required | candidate: 2; assessed: 2; pass: 2; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0connection samples | Euclidean connection distance in metres compared at the recorded sample times only.Targets, measurements and source{
"targets": {
"a": {
"path": "/World/Piping/RawMilk/L_104/Seg_00",
"local_point": [
2.0,
8.4,
0.5399999999999999
]
},
"b": {
"path": "/World/Equipment/TK_102/Ports/OUT",
"local_point": [
0,
0,
0
]
},
"interval_s": [
0,
1
],
"segments": 1,
"schedule": "uniform",
"max_gap_m": 0.001
},
"observed": {
"maximum_sampled_gap_m": 0.0,
"max_gap_m": 0.001
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/79"
} |
| Named attachment points stay within the specified gapspec.conn.l-105.start | motion | Human | PASS | Required | candidate: 2; assessed: 2; pass: 2; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0connection samples | Euclidean connection distance in metres compared at the recorded sample times only.Targets, measurements and source{
"targets": {
"a": {
"path": "/World/Piping/RawMilk/L_105/Seg_00",
"local_point": [
6.2,
4.9,
0.59
]
},
"b": {
"path": "/World/Equipment/BT_101/Ports/OUT",
"local_point": [
0,
0,
0
]
},
"interval_s": [
0,
1
],
"segments": 1,
"schedule": "uniform",
"max_gap_m": 0.001
},
"observed": {
"maximum_sampled_gap_m": 0.0,
"max_gap_m": 0.001
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/80"
} |
| Named attachment points stay within the specified gapspec.conn.l-105.end | motion | Human | PASS | Required | candidate: 2; assessed: 2; pass: 2; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0connection samples | Euclidean connection distance in metres compared at the recorded sample times only.Targets, measurements and source{
"targets": {
"a": {
"path": "/World/Piping/RawMilk/L_105/Seg_01",
"local_point": [
6.2,
4.22,
0.32
]
},
"b": {
"path": "/World/Equipment/P_101/Ports/SUCTION",
"local_point": [
0,
0,
0
]
},
"interval_s": [
0,
1
],
"segments": 1,
"schedule": "uniform",
"max_gap_m": 0.001
},
"observed": {
"maximum_sampled_gap_m": 0.0,
"max_gap_m": 0.001
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/81"
} |
| Named attachment points stay within the specified gapspec.conn.l-106.start | motion | Human | PASS | Required | candidate: 2; assessed: 2; pass: 2; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0connection samples | Euclidean connection distance in metres compared at the recorded sample times only.Targets, measurements and source{
"targets": {
"a": {
"path": "/World/Piping/RawMilk/L_106/Seg_00",
"local_point": [
6.29,
3.985,
0.64
]
},
"b": {
"path": "/World/Equipment/P_101/Ports/DISCHARGE",
"local_point": [
0,
0,
0
]
},
"interval_s": [
0,
1
],
"segments": 1,
"schedule": "uniform",
"max_gap_m": 0.001
},
"observed": {
"maximum_sampled_gap_m": 0.0,
"max_gap_m": 0.001
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/82"
} |
| Named attachment points stay within the specified gapspec.conn.l-106.end | motion | Human | PASS | Required | candidate: 2; assessed: 2; pass: 2; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0connection samples | Euclidean connection distance in metres compared at the recorded sample times only.Targets, measurements and source{
"targets": {
"a": {
"path": "/World/Piping/RawMilk/L_106/Seg_04",
"local_point": [
7.315000000000001,
3.6300000000000003,
0.45
]
},
"b": {
"path": "/World/Equipment/HX_101/Ports/P1_RAW_IN",
"local_point": [
0,
0,
0
]
},
"interval_s": [
0,
1
],
"segments": 1,
"schedule": "uniform",
"max_gap_m": 0.001
},
"observed": {
"maximum_sampled_gap_m": 0.0,
"max_gap_m": 0.001
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/83"
} |
| Named attachment points stay within the specified gapspec.conn.l-107.start | motion | Human | PASS | Required | candidate: 2; assessed: 2; pass: 2; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0connection samples | Euclidean connection distance in metres compared at the recorded sample times only.Targets, measurements and source{
"targets": {
"a": {
"path": "/World/Piping/RawMilk/L_107/Seg_00",
"local_point": [
7.875000000000001,
3.6300000000000003,
1.45
]
},
"b": {
"path": "/World/Equipment/HX_101/Ports/P3_RAW_OUT",
"local_point": [
0,
0,
0
]
},
"interval_s": [
0,
1
],
"segments": 1,
"schedule": "uniform",
"max_gap_m": 0.001
},
"observed": {
"maximum_sampled_gap_m": 0.0,
"max_gap_m": 0.001
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/84"
} |
| Named attachment points stay within the specified gapspec.conn.l-107.end | motion | Human | PASS | Required | candidate: 2; assessed: 2; pass: 2; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0connection samples | Euclidean connection distance in metres compared at the recorded sample times only.Targets, measurements and source{
"targets": {
"a": {
"path": "/World/Piping/RawMilk/L_107/Seg_04",
"local_point": [
13.4,
7.4,
2.0
]
},
"b": {
"path": "/World/Equipment/SEP_101/Ports/FEED",
"local_point": [
0,
0,
0
]
},
"interval_s": [
0,
1
],
"segments": 1,
"schedule": "uniform",
"max_gap_m": 0.001
},
"observed": {
"maximum_sampled_gap_m": 0.0,
"max_gap_m": 0.001
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/85"
} |
| Named attachment points stay within the specified gapspec.conn.l-201.start | motion | Human | PASS | Required | candidate: 2; assessed: 2; pass: 2; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0connection samples | Euclidean connection distance in metres compared at the recorded sample times only.Targets, measurements and source{
"targets": {
"a": {
"path": "/World/Piping/SkimMilk/L_201/Seg_00",
"local_point": [
13.4,
6.98,
1.62
]
},
"b": {
"path": "/World/Equipment/SEP_101/Ports/SKIM_OUT",
"local_point": [
0,
0,
0
]
},
"interval_s": [
0,
1
],
"segments": 1,
"schedule": "uniform",
"max_gap_m": 0.001
},
"observed": {
"maximum_sampled_gap_m": 0.0,
"max_gap_m": 0.001
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/86"
} |
| Named attachment points stay within the specified gapspec.conn.l-201.end | motion | Human | PASS | Required | candidate: 2; assessed: 2; pass: 2; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0connection samples | Euclidean connection distance in metres compared at the recorded sample times only.Targets, measurements and source{
"targets": {
"a": {
"path": "/World/Piping/SkimMilk/L_201/Seg_06",
"local_point": [
8.175,
3.6300000000000003,
0.45
]
},
"b": {
"path": "/World/Equipment/HX_101/Ports/P5_SKIM_IN_S2",
"local_point": [
0,
0,
0
]
},
"interval_s": [
0,
1
],
"segments": 1,
"schedule": "uniform",
"max_gap_m": 0.001
},
"observed": {
"maximum_sampled_gap_m": 0.0,
"max_gap_m": 0.001
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/87"
} |
| Named attachment points stay within the specified gapspec.conn.l-202.start | motion | Human | PASS | Required | candidate: 2; assessed: 2; pass: 2; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0connection samples | Euclidean connection distance in metres compared at the recorded sample times only.Targets, measurements and source{
"targets": {
"a": {
"path": "/World/Piping/SkimMilk/L_202/Seg_00",
"local_point": [
8.175,
3.6300000000000003,
1.45
]
},
"b": {
"path": "/World/Equipment/HX_101/Ports/P6_SKIM_OUT_S2",
"local_point": [
0,
0,
0
]
},
"interval_s": [
0,
1
],
"segments": 1,
"schedule": "uniform",
"max_gap_m": 0.001
},
"observed": {
"maximum_sampled_gap_m": 0.0,
"max_gap_m": 0.001
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/88"
} |
| Named attachment points stay within the specified gapspec.conn.l-202.end | motion | Human | PASS | Required | candidate: 2; assessed: 2; pass: 2; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0connection samples | Euclidean connection distance in metres compared at the recorded sample times only.Targets, measurements and source{
"targets": {
"a": {
"path": "/World/Piping/SkimMilk/L_202/Seg_05",
"local_point": [
10.75,
3.2800000000000002,
0.5
]
},
"b": {
"path": "/World/Equipment/HX_101/HT_101/Ports/IN",
"local_point": [
0,
0,
0
]
},
"interval_s": [
0,
1
],
"segments": 1,
"schedule": "uniform",
"max_gap_m": 0.001
},
"observed": {
"maximum_sampled_gap_m": 0.0,
"max_gap_m": 0.001
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/89"
} |
| Named attachment points stay within the specified gapspec.conn.l-203.start | motion | Human | PASS | Required | candidate: 2; assessed: 2; pass: 2; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0connection samples | Euclidean connection distance in metres compared at the recorded sample times only.Targets, measurements and source{
"targets": {
"a": {
"path": "/World/Piping/SkimMilk/L_203/Seg_00",
"local_point": [
10.75,
3.2800000000000002,
1.25
]
},
"b": {
"path": "/World/Equipment/HX_101/HT_101/Ports/OUT",
"local_point": [
0,
0,
0
]
},
"interval_s": [
0,
1
],
"segments": 1,
"schedule": "uniform",
"max_gap_m": 0.001
},
"observed": {
"maximum_sampled_gap_m": 0.0,
"max_gap_m": 0.001
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/90"
} |
| Named attachment points stay within the specified gapspec.conn.l-203.end | motion | Human | PASS | Required | candidate: 2; assessed: 2; pass: 2; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0connection samples | Euclidean connection distance in metres compared at the recorded sample times only.Targets, measurements and source{
"targets": {
"a": {
"path": "/World/Piping/SkimMilk/L_203/Seg_01",
"local_point": [
10.32,
3.08,
1.25
]
},
"b": {
"path": "/World/Equipment/HX_101/DV_101/Ports/IN",
"local_point": [
0,
0,
0
]
},
"interval_s": [
0,
1
],
"segments": 1,
"schedule": "uniform",
"max_gap_m": 0.001
},
"observed": {
"maximum_sampled_gap_m": 0.0,
"max_gap_m": 0.001
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/91"
} |
| Named attachment points stay within the specified gapspec.conn.l-204.start | motion | Human | PASS | Required | candidate: 2; assessed: 2; pass: 2; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0connection samples | Euclidean connection distance in metres compared at the recorded sample times only.Targets, measurements and source{
"targets": {
"a": {
"path": "/World/Piping/SkimMilk/L_204/Seg_00",
"local_point": [
9.98,
3.08,
1.25
]
},
"b": {
"path": "/World/Equipment/HX_101/DV_101/Ports/FORWARD",
"local_point": [
0,
0,
0
]
},
"interval_s": [
0,
1
],
"segments": 1,
"schedule": "uniform",
"max_gap_m": 0.001
},
"observed": {
"maximum_sampled_gap_m": 0.0,
"max_gap_m": 0.001
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/92"
} |
| Named attachment points stay within the specified gapspec.conn.l-204.end | motion | Human | PASS | Required | candidate: 2; assessed: 2; pass: 2; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0connection samples | Euclidean connection distance in metres compared at the recorded sample times only.Targets, measurements and source{
"targets": {
"a": {
"path": "/World/Piping/SkimMilk/L_204/Seg_02",
"local_point": [
7.875000000000001,
3.6300000000000003,
0.45
]
},
"b": {
"path": "/World/Equipment/HX_101/Ports/P4_PAST_IN_S1",
"local_point": [
0,
0,
0
]
},
"interval_s": [
0,
1
],
"segments": 1,
"schedule": "uniform",
"max_gap_m": 0.001
},
"observed": {
"maximum_sampled_gap_m": 0.0,
"max_gap_m": 0.001
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/93"
} |
| Named attachment points stay within the specified gapspec.conn.l-205.start | motion | Human | PASS | Required | candidate: 2; assessed: 2; pass: 2; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0connection samples | Euclidean connection distance in metres compared at the recorded sample times only.Targets, measurements and source{
"targets": {
"a": {
"path": "/World/Piping/SkimMilk/L_205/Seg_00",
"local_point": [
10.15,
3.08,
0.95
]
},
"b": {
"path": "/World/Equipment/HX_101/DV_101/Ports/DIVERT",
"local_point": [
0,
0,
0
]
},
"interval_s": [
0,
1
],
"segments": 1,
"schedule": "uniform",
"max_gap_m": 0.001
},
"observed": {
"maximum_sampled_gap_m": 0.0,
"max_gap_m": 0.001
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/94"
} |
| Named attachment points stay within the specified gapspec.conn.l-205.end | motion | Human | PASS | Required | candidate: 2; assessed: 2; pass: 2; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0connection samples | Euclidean connection distance in metres compared at the recorded sample times only.Targets, measurements and source{
"targets": {
"a": {
"path": "/World/Piping/SkimMilk/L_205/Seg_05",
"local_point": [
6.3672,
4.9,
1.670983267714152
]
},
"b": {
"path": "/World/Equipment/BT_101/Ports/RETURN",
"local_point": [
0,
0,
0
]
},
"interval_s": [
0,
1
],
"segments": 1,
"schedule": "uniform",
"max_gap_m": 0.001
},
"observed": {
"maximum_sampled_gap_m": 0.0,
"max_gap_m": 0.001
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/95"
} |
| Named attachment points stay within the specified gapspec.conn.l-206.start | motion | Human | PASS | Required | candidate: 2; assessed: 2; pass: 2; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0connection samples | Euclidean connection distance in metres compared at the recorded sample times only.Targets, measurements and source{
"targets": {
"a": {
"path": "/World/Piping/SkimMilk/L_206/Seg_00",
"local_point": [
7.315000000000001,
3.6300000000000003,
1.45
]
},
"b": {
"path": "/World/Equipment/HX_101/Ports/P2_PAST_OUT_S1",
"local_point": [
0,
0,
0
]
},
"interval_s": [
0,
1
],
"segments": 1,
"schedule": "uniform",
"max_gap_m": 0.001
},
"observed": {
"maximum_sampled_gap_m": 0.0,
"max_gap_m": 0.001
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/96"
} |
| Named attachment points stay within the specified gapspec.conn.l-206.end | motion | Human | PASS | Required | candidate: 2; assessed: 2; pass: 2; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0connection samples | Euclidean connection distance in metres compared at the recorded sample times only.Targets, measurements and source{
"targets": {
"a": {
"path": "/World/Piping/SkimMilk/L_206/Seg_02",
"local_point": [
8.577000000000002,
3.6300000000000003,
1.45
]
},
"b": {
"path": "/World/Equipment/HX_101/Ports/P7_PAST_IN_S3",
"local_point": [
0,
0,
0
]
},
"interval_s": [
0,
1
],
"segments": 1,
"schedule": "uniform",
"max_gap_m": 0.001
},
"observed": {
"maximum_sampled_gap_m": 0.0,
"max_gap_m": 0.001
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/97"
} |
| Named attachment points stay within the specified gapspec.conn.l-207.start | motion | Human | PASS | Required | candidate: 2; assessed: 2; pass: 2; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0connection samples | Euclidean connection distance in metres compared at the recorded sample times only.Targets, measurements and source{
"targets": {
"a": {
"path": "/World/Piping/SkimMilk/L_207/Seg_00",
"local_point": [
8.577000000000002,
3.6300000000000003,
0.45
]
},
"b": {
"path": "/World/Equipment/HX_101/Ports/P8_PAST_OUT_S3",
"local_point": [
0,
0,
0
]
},
"interval_s": [
0,
1
],
"segments": 1,
"schedule": "uniform",
"max_gap_m": 0.001
},
"observed": {
"maximum_sampled_gap_m": 0.0,
"max_gap_m": 0.001
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/98"
} |
| Named attachment points stay within the specified gapspec.conn.l-207.end | motion | Human | PASS | Required | candidate: 2; assessed: 2; pass: 2; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0connection samples | Euclidean connection distance in metres compared at the recorded sample times only.Targets, measurements and source{
"targets": {
"a": {
"path": "/World/Piping/SkimMilk/L_207/Seg_07",
"local_point": [
22.3,
4.2775,
3.275173673219653
]
},
"b": {
"path": "/World/Equipment/TK_301/Ports/IN",
"local_point": [
0,
0,
0
]
},
"interval_s": [
0,
1
],
"segments": 1,
"schedule": "uniform",
"max_gap_m": 0.001
},
"observed": {
"maximum_sampled_gap_m": 0.0,
"max_gap_m": 0.001
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/99"
} |
| Named attachment points stay within the specified gapspec.conn.l-208.start | motion | Human | PASS | Required | candidate: 2; assessed: 2; pass: 2; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0connection samples | Euclidean connection distance in metres compared at the recorded sample times only.Targets, measurements and source{
"targets": {
"a": {
"path": "/World/Piping/SkimMilk/L_208/Seg_00",
"local_point": [
22.3,
4.8,
0.5399999999999999
]
},
"b": {
"path": "/World/Equipment/TK_301/Ports/OUT",
"local_point": [
0,
0,
0
]
},
"interval_s": [
0,
1
],
"segments": 1,
"schedule": "uniform",
"max_gap_m": 0.001
},
"observed": {
"maximum_sampled_gap_m": 0.0,
"max_gap_m": 0.001
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/100"
} |
| Named attachment points stay within the specified gapspec.conn.l-301.start | motion | Human | PASS | Required | candidate: 2; assessed: 2; pass: 2; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0connection samples | Euclidean connection distance in metres compared at the recorded sample times only.Targets, measurements and source{
"targets": {
"a": {
"path": "/World/Piping/Cream/L_301/Seg_00",
"local_point": [
13.4,
7.82,
1.72
]
},
"b": {
"path": "/World/Equipment/SEP_101/Ports/CREAM_OUT",
"local_point": [
0,
0,
0
]
},
"interval_s": [
0,
1
],
"segments": 1,
"schedule": "uniform",
"max_gap_m": 0.001
},
"observed": {
"maximum_sampled_gap_m": 0.0,
"max_gap_m": 0.001
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/101"
} |
| Named attachment points stay within the specified gapspec.conn.l-301.end | motion | Human | PASS | Required | candidate: 2; assessed: 2; pass: 2; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0connection samples | Euclidean connection distance in metres compared at the recorded sample times only.Targets, measurements and source{
"targets": {
"a": {
"path": "/World/Piping/Cream/L_301/Seg_04",
"local_point": [
15.1,
9.2778,
2.064975590547821
]
},
"b": {
"path": "/World/Equipment/TK_201/Ports/IN",
"local_point": [
0,
0,
0
]
},
"interval_s": [
0,
1
],
"segments": 1,
"schedule": "uniform",
"max_gap_m": 0.001
},
"observed": {
"maximum_sampled_gap_m": 0.0,
"max_gap_m": 0.001
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/102"
} |
| Named attachment points stay within the specified gapspec.conn.l-302.start | motion | Human | PASS | Required | candidate: 2; assessed: 2; pass: 2; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0connection samples | Euclidean connection distance in metres compared at the recorded sample times only.Targets, measurements and source{
"targets": {
"a": {
"path": "/World/Piping/Cream/L_302/Seg_00",
"local_point": [
15.1,
9.5,
0.5399999999999999
]
},
"b": {
"path": "/World/Equipment/TK_201/Ports/OUT",
"local_point": [
0,
0,
0
]
},
"interval_s": [
0,
1
],
"segments": 1,
"schedule": "uniform",
"max_gap_m": 0.001
},
"observed": {
"maximum_sampled_gap_m": 0.0,
"max_gap_m": 0.001
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/103"
} |
| Named attachment points stay within the specified gapspec.conn.l-302.end | motion | Human | PASS | Required | candidate: 2; assessed: 2; pass: 2; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0connection samples | Euclidean connection distance in metres compared at the recorded sample times only.Targets, measurements and source{
"targets": {
"a": {
"path": "/World/Piping/Cream/L_302/Seg_03",
"local_point": [
16.049999999999997,
8.53,
0.32
]
},
"b": {
"path": "/World/Equipment/HX_201/P_201/Ports/SUCTION",
"local_point": [
0,
0,
0
]
},
"interval_s": [
0,
1
],
"segments": 1,
"schedule": "uniform",
"max_gap_m": 0.001
},
"observed": {
"maximum_sampled_gap_m": 0.0,
"max_gap_m": 0.001
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/104"
} |
| Named attachment points stay within the specified gapspec.conn.l-303.start | motion | Human | PASS | Required | candidate: 2; assessed: 2; pass: 2; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0connection samples | Euclidean connection distance in metres compared at the recorded sample times only.Targets, measurements and source{
"targets": {
"a": {
"path": "/World/Piping/Cream/L_303/Seg_00",
"local_point": [
15.959999999999997,
8.765,
0.64
]
},
"b": {
"path": "/World/Equipment/HX_201/P_201/Ports/DISCHARGE",
"local_point": [
0,
0,
0
]
},
"interval_s": [
0,
1
],
"segments": 1,
"schedule": "uniform",
"max_gap_m": 0.001
},
"observed": {
"maximum_sampled_gap_m": 0.0,
"max_gap_m": 0.001
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/105"
} |
| Named attachment points stay within the specified gapspec.conn.l-303.end | motion | Human | PASS | Required | candidate: 2; assessed: 2; pass: 2; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0connection samples | Euclidean connection distance in metres compared at the recorded sample times only.Targets, measurements and source{
"targets": {
"a": {
"path": "/World/Piping/Cream/L_303/Seg_03",
"local_point": [
16.564999999999998,
8.93,
0.42
]
},
"b": {
"path": "/World/Equipment/HX_201/Ports/C1_CREAM_IN",
"local_point": [
0,
0,
0
]
},
"interval_s": [
0,
1
],
"segments": 1,
"schedule": "uniform",
"max_gap_m": 0.001
},
"observed": {
"maximum_sampled_gap_m": 0.0,
"max_gap_m": 0.001
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/106"
} |
| Named attachment points stay within the specified gapspec.conn.l-304.start | motion | Human | PASS | Required | candidate: 2; assessed: 2; pass: 2; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0connection samples | Euclidean connection distance in metres compared at the recorded sample times only.Targets, measurements and source{
"targets": {
"a": {
"path": "/World/Piping/Cream/L_304/Seg_00",
"local_point": [
16.941,
8.93,
1.08
]
},
"b": {
"path": "/World/Equipment/HX_201/Ports/C2_CREAM_HOT_OUT",
"local_point": [
0,
0,
0
]
},
"interval_s": [
0,
1
],
"segments": 1,
"schedule": "uniform",
"max_gap_m": 0.001
},
"observed": {
"maximum_sampled_gap_m": 0.0,
"max_gap_m": 0.001
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/107"
} |
| Named attachment points stay within the specified gapspec.conn.l-304.end | motion | Human | PASS | Required | candidate: 2; assessed: 2; pass: 2; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0connection samples | Euclidean connection distance in metres compared at the recorded sample times only.Targets, measurements and source{
"targets": {
"a": {
"path": "/World/Piping/Cream/L_304/Seg_05",
"local_point": [
18.9,
8.58,
0.45
]
},
"b": {
"path": "/World/Equipment/HX_201/HT_201/Ports/IN",
"local_point": [
0,
0,
0
]
},
"interval_s": [
0,
1
],
"segments": 1,
"schedule": "uniform",
"max_gap_m": 0.001
},
"observed": {
"maximum_sampled_gap_m": 0.0,
"max_gap_m": 0.001
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/108"
} |
| Named attachment points stay within the specified gapspec.conn.l-305.start | motion | Human | PASS | Required | candidate: 2; assessed: 2; pass: 2; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0connection samples | Euclidean connection distance in metres compared at the recorded sample times only.Targets, measurements and source{
"targets": {
"a": {
"path": "/World/Piping/Cream/L_305/Seg_00",
"local_point": [
18.9,
8.58,
1.05
]
},
"b": {
"path": "/World/Equipment/HX_201/HT_201/Ports/OUT",
"local_point": [
0,
0,
0
]
},
"interval_s": [
0,
1
],
"segments": 1,
"schedule": "uniform",
"max_gap_m": 0.001
},
"observed": {
"maximum_sampled_gap_m": 0.0,
"max_gap_m": 0.001
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/109"
} |
| Named attachment points stay within the specified gapspec.conn.l-305.end | motion | Human | PASS | Required | candidate: 2; assessed: 2; pass: 2; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0connection samples | Euclidean connection distance in metres compared at the recorded sample times only.Targets, measurements and source{
"targets": {
"a": {
"path": "/World/Piping/Cream/L_305/Seg_01",
"local_point": [
18.52,
8.379999999999999,
1.05
]
},
"b": {
"path": "/World/Equipment/HX_201/DV_201/Ports/IN",
"local_point": [
0,
0,
0
]
},
"interval_s": [
0,
1
],
"segments": 1,
"schedule": "uniform",
"max_gap_m": 0.001
},
"observed": {
"maximum_sampled_gap_m": 0.0,
"max_gap_m": 0.001
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/110"
} |
| Named attachment points stay within the specified gapspec.conn.l-306.start | motion | Human | PASS | Required | candidate: 2; assessed: 2; pass: 2; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0connection samples | Euclidean connection distance in metres compared at the recorded sample times only.Targets, measurements and source{
"targets": {
"a": {
"path": "/World/Piping/Cream/L_306/Seg_00",
"local_point": [
18.179999999999996,
8.379999999999999,
1.05
]
},
"b": {
"path": "/World/Equipment/HX_201/DV_201/Ports/FORWARD",
"local_point": [
0,
0,
0
]
},
"interval_s": [
0,
1
],
"segments": 1,
"schedule": "uniform",
"max_gap_m": 0.001
},
"observed": {
"maximum_sampled_gap_m": 0.0,
"max_gap_m": 0.001
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/111"
} |
| Named attachment points stay within the specified gapspec.conn.l-306.end | motion | Human | PASS | Required | candidate: 2; assessed: 2; pass: 2; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0connection samples | Euclidean connection distance in metres compared at the recorded sample times only.Targets, measurements and source{
"targets": {
"a": {
"path": "/World/Piping/Cream/L_306/Seg_03",
"local_point": [
16.941,
8.93,
0.42
]
},
"b": {
"path": "/World/Equipment/HX_201/Ports/C3_CREAM_COOL_IN",
"local_point": [
0,
0,
0
]
},
"interval_s": [
0,
1
],
"segments": 1,
"schedule": "uniform",
"max_gap_m": 0.001
},
"observed": {
"maximum_sampled_gap_m": 0.0,
"max_gap_m": 0.001
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/112"
} |
| Named attachment points stay within the specified gapspec.conn.l-307.start | motion | Human | PASS | Required | candidate: 2; assessed: 2; pass: 2; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0connection samples | Euclidean connection distance in metres compared at the recorded sample times only.Targets, measurements and source{
"targets": {
"a": {
"path": "/World/Piping/Cream/L_307/Seg_00",
"local_point": [
18.349999999999998,
8.379999999999999,
0.75
]
},
"b": {
"path": "/World/Equipment/HX_201/DV_201/Ports/DIVERT",
"local_point": [
0,
0,
0
]
},
"interval_s": [
0,
1
],
"segments": 1,
"schedule": "uniform",
"max_gap_m": 0.001
},
"observed": {
"maximum_sampled_gap_m": 0.0,
"max_gap_m": 0.001
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/113"
} |
| Named attachment points stay within the specified gapspec.conn.l-307.end | motion | Human | PASS | Required | candidate: 2; assessed: 2; pass: 2; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0connection samples | Euclidean connection distance in metres compared at the recorded sample times only.Targets, measurements and source{
"targets": {
"a": {
"path": "/World/Piping/Cream/L_307/Seg_06",
"local_point": [
15.3222,
9.5,
2.064975590547821
]
},
"b": {
"path": "/World/Equipment/TK_201/Ports/RETURN",
"local_point": [
0,
0,
0
]
},
"interval_s": [
0,
1
],
"segments": 1,
"schedule": "uniform",
"max_gap_m": 0.001
},
"observed": {
"maximum_sampled_gap_m": 0.0,
"max_gap_m": 0.001
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/114"
} |
| Named attachment points stay within the specified gapspec.conn.l-308.start | motion | Human | PASS | Required | candidate: 2; assessed: 2; pass: 2; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0connection samples | Euclidean connection distance in metres compared at the recorded sample times only.Targets, measurements and source{
"targets": {
"a": {
"path": "/World/Piping/Cream/L_308/Seg_00",
"local_point": [
17.250999999999998,
8.93,
1.08
]
},
"b": {
"path": "/World/Equipment/HX_201/Ports/C4_CREAM_COOL_OUT",
"local_point": [
0,
0,
0
]
},
"interval_s": [
0,
1
],
"segments": 1,
"schedule": "uniform",
"max_gap_m": 0.001
},
"observed": {
"maximum_sampled_gap_m": 0.0,
"max_gap_m": 0.001
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/115"
} |
| Named attachment points stay within the specified gapspec.conn.l-308.end | motion | Human | PASS | Required | candidate: 2; assessed: 2; pass: 2; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0connection samples | Euclidean connection distance in metres compared at the recorded sample times only.Targets, measurements and source{
"targets": {
"a": {
"path": "/World/Piping/Cream/L_308/Seg_04",
"local_point": [
22.3,
9.07,
2.151200543301812
]
},
"b": {
"path": "/World/Equipment/TK_302/Ports/IN",
"local_point": [
0,
0,
0
]
},
"interval_s": [
0,
1
],
"segments": 1,
"schedule": "uniform",
"max_gap_m": 0.001
},
"observed": {
"maximum_sampled_gap_m": 0.0,
"max_gap_m": 0.001
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/116"
} |
| Named attachment points stay within the specified gapspec.conn.l-309.start | motion | Human | PASS | Required | candidate: 2; assessed: 2; pass: 2; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0connection samples | Euclidean connection distance in metres compared at the recorded sample times only.Targets, measurements and source{
"targets": {
"a": {
"path": "/World/Piping/Cream/L_309/Seg_00",
"local_point": [
22.3,
9.4,
0.49
]
},
"b": {
"path": "/World/Equipment/TK_302/Ports/OUT",
"local_point": [
0,
0,
0
]
},
"interval_s": [
0,
1
],
"segments": 1,
"schedule": "uniform",
"max_gap_m": 0.001
},
"observed": {
"maximum_sampled_gap_m": 0.0,
"max_gap_m": 0.001
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/117"
} |
| Named attachment points stay within the specified gapspec.conn.l-401.start | motion | Human | PASS | Required | candidate: 2; assessed: 2; pass: 2; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0connection samples | Euclidean connection distance in metres compared at the recorded sample times only.Targets, measurements and source{
"targets": {
"a": {
"path": "/World/Piping/CIP/L_401/Seg_00",
"local_point": [
11.4,
13.200000000000001,
2.45
]
},
"b": {
"path": "/World/Equipment/CIP_401/Ports/CIPS_OUT",
"local_point": [
0,
0,
0
]
},
"interval_s": [
0,
1
],
"segments": 1,
"schedule": "uniform",
"max_gap_m": 0.001
},
"observed": {
"maximum_sampled_gap_m": 0.0,
"max_gap_m": 0.001
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/118"
} |
| Named attachment points stay within the specified gapspec.conn.l-411.end | motion | Human | PASS | Required | candidate: 2; assessed: 2; pass: 2; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0connection samples | Euclidean connection distance in metres compared at the recorded sample times only.Targets, measurements and source{
"targets": {
"a": {
"path": "/World/Piping/CIP/L_411/Seg_01",
"local_point": [
1.630536706830029,
5.269463293169972,
3.275173673219653
]
},
"b": {
"path": "/World/Equipment/TK_101/Ports/CIP",
"local_point": [
0,
0,
0
]
},
"interval_s": [
0,
1
],
"segments": 1,
"schedule": "uniform",
"max_gap_m": 0.001
},
"observed": {
"maximum_sampled_gap_m": 0.0,
"max_gap_m": 0.001
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/119"
} |
| Named attachment points stay within the specified gapspec.conn.l-412.end | motion | Human | PASS | Required | candidate: 2; assessed: 2; pass: 2; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0connection samples | Euclidean connection distance in metres compared at the recorded sample times only.Targets, measurements and source{
"targets": {
"a": {
"path": "/World/Piping/CIP/L_412/Seg_01",
"local_point": [
1.73875,
8.85249827347737,
3.275173673219653
]
},
"b": {
"path": "/World/Equipment/TK_102/Ports/CIP",
"local_point": [
0,
0,
0
]
},
"interval_s": [
0,
1
],
"segments": 1,
"schedule": "uniform",
"max_gap_m": 0.001
},
"observed": {
"maximum_sampled_gap_m": 0.0,
"max_gap_m": 0.001
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/120"
} |
| Named attachment points stay within the specified gapspec.conn.l-413.end | motion | Human | PASS | Required | candidate: 2; assessed: 2; pass: 2; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0connection samples | Euclidean connection distance in metres compared at the recorded sample times only.Targets, measurements and source{
"targets": {
"a": {
"path": "/World/Piping/CIP/L_413/Seg_01",
"local_point": [
6.2,
5.067200000000001,
1.670983267714152
]
},
"b": {
"path": "/World/Equipment/BT_101/Ports/CIP",
"local_point": [
0,
0,
0
]
},
"interval_s": [
0,
1
],
"segments": 1,
"schedule": "uniform",
"max_gap_m": 0.001
},
"observed": {
"maximum_sampled_gap_m": 0.0,
"max_gap_m": 0.001
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/121"
} |
| Named attachment points stay within the specified gapspec.conn.l-414.end | motion | Human | PASS | Required | candidate: 2; assessed: 2; pass: 2; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0connection samples | Euclidean connection distance in metres compared at the recorded sample times only.Targets, measurements and source{
"targets": {
"a": {
"path": "/World/Piping/CIP/L_414/Seg_01",
"local_point": [
15.1,
9.7222,
2.064975590547821
]
},
"b": {
"path": "/World/Equipment/TK_201/Ports/CIP",
"local_point": [
0,
0,
0
]
},
"interval_s": [
0,
1
],
"segments": 1,
"schedule": "uniform",
"max_gap_m": 0.001
},
"observed": {
"maximum_sampled_gap_m": 0.0,
"max_gap_m": 0.001
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/122"
} |
| Named attachment points stay within the specified gapspec.conn.l-415.end | motion | Human | PASS | Required | candidate: 2; assessed: 2; pass: 2; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0connection samples | Euclidean connection distance in metres compared at the recorded sample times only.Targets, measurements and source{
"targets": {
"a": {
"path": "/World/Piping/CIP/L_415/Seg_01",
"local_point": [
21.93053670683003,
5.169463293169971,
3.275173673219653
]
},
"b": {
"path": "/World/Equipment/TK_301/Ports/CIP",
"local_point": [
0,
0,
0
]
},
"interval_s": [
0,
1
],
"segments": 1,
"schedule": "uniform",
"max_gap_m": 0.001
},
"observed": {
"maximum_sampled_gap_m": 0.0,
"max_gap_m": 0.001
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/123"
} |
| Named attachment points stay within the specified gapspec.conn.l-416.end | motion | Human | PASS | Required | candidate: 2; assessed: 2; pass: 2; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0connection samples | Euclidean connection distance in metres compared at the recorded sample times only.Targets, measurements and source{
"targets": {
"a": {
"path": "/World/Piping/CIP/L_416/Seg_01",
"local_point": [
22.06665476220844,
9.633345237791561,
2.151200543301812
]
},
"b": {
"path": "/World/Equipment/TK_302/Ports/CIP",
"local_point": [
0,
0,
0
]
},
"interval_s": [
0,
1
],
"segments": 1,
"schedule": "uniform",
"max_gap_m": 0.001
},
"observed": {
"maximum_sampled_gap_m": 0.0,
"max_gap_m": 0.001
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/124"
} |
| Named attachment points stay within the specified gapspec.conn.l-420.end | motion | Human | PASS | Required | candidate: 2; assessed: 2; pass: 2; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0connection samples | Euclidean connection distance in metres compared at the recorded sample times only.Targets, measurements and source{
"targets": {
"a": {
"path": "/World/Piping/CIP/L_420/Seg_02",
"local_point": [
11.75,
13.200000000000001,
2.45
]
},
"b": {
"path": "/World/Equipment/CIP_401/Ports/CIPR_IN",
"local_point": [
0,
0,
0
]
},
"interval_s": [
0,
1
],
"segments": 1,
"schedule": "uniform",
"max_gap_m": 0.001
},
"observed": {
"maximum_sampled_gap_m": 0.0,
"max_gap_m": 0.001
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/125"
} |
| Named attachment points stay within the specified gapspec.conn.l-501.end | motion | Human | PASS | Required | candidate: 2; assessed: 2; pass: 2; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0connection samples | Euclidean connection distance in metres compared at the recorded sample times only.Targets, measurements and source{
"targets": {
"a": {
"path": "/World/Piping/HotWater/L_501/Seg_02",
"local_point": [
8.175,
4.8500000000000005,
1.45
]
},
"b": {
"path": "/World/Equipment/HX_101/Ports/HW_IN",
"local_point": [
0,
0,
0
]
},
"interval_s": [
0,
1
],
"segments": 1,
"schedule": "uniform",
"max_gap_m": 0.001
},
"observed": {
"maximum_sampled_gap_m": 0.0,
"max_gap_m": 0.001
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/126"
} |
| Named attachment points stay within the specified gapspec.conn.l-502.start | motion | Human | PASS | Required | candidate: 2; assessed: 2; pass: 2; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0connection samples | Euclidean connection distance in metres compared at the recorded sample times only.Targets, measurements and source{
"targets": {
"a": {
"path": "/World/Piping/HotWater/L_502/Seg_00",
"local_point": [
7.875000000000001,
4.8500000000000005,
0.45
]
},
"b": {
"path": "/World/Equipment/HX_101/Ports/HW_OUT",
"local_point": [
0,
0,
0
]
},
"interval_s": [
0,
1
],
"segments": 1,
"schedule": "uniform",
"max_gap_m": 0.001
},
"observed": {
"maximum_sampled_gap_m": 0.0,
"max_gap_m": 0.001
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/127"
} |
| Named attachment points stay within the specified gapspec.conn.l-511.end | motion | Human | PASS | Required | candidate: 2; assessed: 2; pass: 2; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0connection samples | Euclidean connection distance in metres compared at the recorded sample times only.Targets, measurements and source{
"targets": {
"a": {
"path": "/World/Piping/ChilledWater/L_511/Seg_03",
"local_point": [
8.577000000000002,
4.8500000000000005,
0.45
]
},
"b": {
"path": "/World/Equipment/HX_101/Ports/CHW_IN",
"local_point": [
0,
0,
0
]
},
"interval_s": [
0,
1
],
"segments": 1,
"schedule": "uniform",
"max_gap_m": 0.001
},
"observed": {
"maximum_sampled_gap_m": 0.0,
"max_gap_m": 0.001
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/128"
} |
| Named attachment points stay within the specified gapspec.conn.l-512.start | motion | Human | PASS | Required | candidate: 2; assessed: 2; pass: 2; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0connection samples | Euclidean connection distance in metres compared at the recorded sample times only.Targets, measurements and source{
"targets": {
"a": {
"path": "/World/Piping/ChilledWater/L_512/Seg_00",
"local_point": [
8.577000000000002,
4.8500000000000005,
1.45
]
},
"b": {
"path": "/World/Equipment/HX_101/Ports/CHW_OUT",
"local_point": [
0,
0,
0
]
},
"interval_s": [
0,
1
],
"segments": 1,
"schedule": "uniform",
"max_gap_m": 0.001
},
"observed": {
"maximum_sampled_gap_m": 0.0,
"max_gap_m": 0.001
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/129"
} |
| Named attachment points stay within the specified gapspec.conn.l-503.end | motion | Human | PASS | Required | candidate: 2; assessed: 2; pass: 2; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0connection samples | Euclidean connection distance in metres compared at the recorded sample times only.Targets, measurements and source{
"targets": {
"a": {
"path": "/World/Piping/HotWater/L_503/Seg_02",
"local_point": [
16.564999999999998,
9.95,
1.08
]
},
"b": {
"path": "/World/Equipment/HX_201/Ports/HW_IN",
"local_point": [
0,
0,
0
]
},
"interval_s": [
0,
1
],
"segments": 1,
"schedule": "uniform",
"max_gap_m": 0.001
},
"observed": {
"maximum_sampled_gap_m": 0.0,
"max_gap_m": 0.001
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/130"
} |
| Named attachment points stay within the specified gapspec.conn.l-504.start | motion | Human | PASS | Required | candidate: 2; assessed: 2; pass: 2; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0connection samples | Euclidean connection distance in metres compared at the recorded sample times only.Targets, measurements and source{
"targets": {
"a": {
"path": "/World/Piping/HotWater/L_504/Seg_00",
"local_point": [
16.564999999999998,
9.95,
0.42
]
},
"b": {
"path": "/World/Equipment/HX_201/Ports/HW_OUT",
"local_point": [
0,
0,
0
]
},
"interval_s": [
0,
1
],
"segments": 1,
"schedule": "uniform",
"max_gap_m": 0.001
},
"observed": {
"maximum_sampled_gap_m": 0.0,
"max_gap_m": 0.001
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/131"
} |
| Named attachment points stay within the specified gapspec.conn.l-513.end | motion | Human | PASS | Required | candidate: 2; assessed: 2; pass: 2; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0connection samples | Euclidean connection distance in metres compared at the recorded sample times only.Targets, measurements and source{
"targets": {
"a": {
"path": "/World/Piping/ChilledWater/L_513/Seg_03",
"local_point": [
17.250999999999998,
9.95,
0.42
]
},
"b": {
"path": "/World/Equipment/HX_201/Ports/CHW_IN",
"local_point": [
0,
0,
0
]
},
"interval_s": [
0,
1
],
"segments": 1,
"schedule": "uniform",
"max_gap_m": 0.001
},
"observed": {
"maximum_sampled_gap_m": 0.0,
"max_gap_m": 0.001
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/132"
} |
| Named attachment points stay within the specified gapspec.conn.l-514.start | motion | Human | PASS | Required | candidate: 2; assessed: 2; pass: 2; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0connection samples | Euclidean connection distance in metres compared at the recorded sample times only.Targets, measurements and source{
"targets": {
"a": {
"path": "/World/Piping/ChilledWater/L_514/Seg_00",
"local_point": [
17.250999999999998,
9.95,
1.08
]
},
"b": {
"path": "/World/Equipment/HX_201/Ports/CHW_OUT",
"local_point": [
0,
0,
0
]
},
"interval_s": [
0,
1
],
"segments": 1,
"schedule": "uniform",
"max_gap_m": 0.001
},
"observed": {
"maximum_sampled_gap_m": 0.0,
"max_gap_m": 0.001
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/133"
} |
| Named attachment points stay within the specified gapspec.conn.l-521.end | motion | Human | PASS | Required | candidate: 2; assessed: 2; pass: 2; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0connection samples | Euclidean connection distance in metres compared at the recorded sample times only.Targets, measurements and source{
"targets": {
"a": {
"path": "/World/Piping/CompressedAir/L_521/Seg_01",
"local_point": [
10.15,
3.08,
1.83
]
},
"b": {
"path": "/World/Equipment/HX_101/DV_101/Ports/AIR",
"local_point": [
0,
0,
0
]
},
"interval_s": [
0,
1
],
"segments": 1,
"schedule": "uniform",
"max_gap_m": 0.001
},
"observed": {
"maximum_sampled_gap_m": 0.0,
"max_gap_m": 0.001
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/134"
} |
| Named attachment points stay within the specified gapspec.conn.l-522.end | motion | Human | PASS | Required | candidate: 2; assessed: 2; pass: 2; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0connection samples | Euclidean connection distance in metres compared at the recorded sample times only.Targets, measurements and source{
"targets": {
"a": {
"path": "/World/Piping/CompressedAir/L_522/Seg_01",
"local_point": [
18.349999999999998,
8.379999999999999,
1.63
]
},
"b": {
"path": "/World/Equipment/HX_201/DV_201/Ports/AIR",
"local_point": [
0,
0,
0
]
},
"interval_s": [
0,
1
],
"segments": 1,
"schedule": "uniform",
"max_gap_m": 0.001
},
"observed": {
"maximum_sampled_gap_m": 0.0,
"max_gap_m": 0.001
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/135"
} |
| Named attachment points stay within the specified gapspec.conn.l-523.end | motion | Human | PASS | Required | candidate: 2; assessed: 2; pass: 2; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0connection samples | Euclidean connection distance in metres compared at the recorded sample times only.Targets, measurements and source{
"targets": {
"a": {
"path": "/World/Piping/CompressedAir/L_523/Seg_01",
"local_point": [
11.85,
14.100000000000001,
1.55
]
},
"b": {
"path": "/World/Equipment/CIP_401/Ports/AIR",
"local_point": [
0,
0,
0
]
},
"interval_s": [
0,
1
],
"segments": 1,
"schedule": "uniform",
"max_gap_m": 0.001
},
"observed": {
"maximum_sampled_gap_m": 0.0,
"max_gap_m": 0.001
},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/136"
} |
| Named objects have the specified material bindingsspec.materials | materials | Human | PASS | Required | candidate: 111; assessed: 111; pass: 111; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0comparisons | Resolved bindings, selected surface shader IDs and declared external file existence checked.Targets, measurements and source{
"targets": {
"bindings": {
"/World/Equipment/TK_101/Shell": "/World/Looks/ss_cladding",
"/World/Equipment/SEP_101/Frame": "/World/Looks/ss_dull",
"/World/Piping/SkimMilk/L_201/Seg_00": "/World/Looks/ss_pipe",
"/World/Equipment/SEP_101/DriveMotor": "/World/Looks/paint_motor",
"/World/Equipment/CP_601/Cabinet": "/World/Looks/paint_cabinet",
"/World/Structure/Floor": "/World/Looks/floor_epoxy"
},
"purpose": "",
"render_context": "",
"surface_shader_id": "UsdPreviewSurface"
},
"observed": {},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/137"
} |
| Selected texture can be decodedspec.tex.sep-101 | textures | Human | PASS | Required | candidate: 1; assessed: 1; pass: 1; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0selected texture attributes | Selected image verified and fully decoded within the stated limits.Targets, measurements and source{
"targets": {
"asset_attribute": "/World/Looks/Label_tag_SEP_101/Texture.inputs:file",
"max_pixels": 4000000,
"max_bytes": 8388608
},
"observed": {},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/138"
} |
| Selected texture can be decodedspec.tex.hx-101 | textures | Human | PASS | Required | candidate: 1; assessed: 1; pass: 1; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0selected texture attributes | Selected image verified and fully decoded within the stated limits.Targets, measurements and source{
"targets": {
"asset_attribute": "/World/Looks/Label_tag_HX_101/Texture.inputs:file",
"max_pixels": 4000000,
"max_bytes": 8388608
},
"observed": {},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/139"
} |
| Selected texture can be decodedspec.tex.tk-301 | textures | Human | PASS | Required | candidate: 1; assessed: 1; pass: 1; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0selected texture attributes | Selected image verified and fully decoded within the stated limits.Targets, measurements and source{
"targets": {
"asset_attribute": "/World/Looks/Label_tag_TK_301/Texture.inputs:file",
"max_pixels": 4000000,
"max_bytes": 8388608
},
"observed": {},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/140"
} |
| Selected texture can be decodedspec.tex.cip-401 | textures | Human | PASS | Required | candidate: 1; assessed: 1; pass: 1; fail: 0; warning: 0; unknown: 0; error: 0; skipped: 0selected texture attributes | Selected image verified and fully decoded within the stated limits.Targets, measurements and source{
"targets": {
"asset_attribute": "/World/Looks/Label_tag_CIP_401/Texture.inputs:file",
"max_pixels": 4000000,
"max_bytes": 8388608
},
"observed": {},
"source": {
"provided_by": "agent",
"reference": "Caller-mapped by the producing agent from 01-requirements-brief.md; tolerances marked as agent decisions; not reviewed by the owner"
},
"evidence_pointer": "/checks/141"
} |
Input and execution checks
| Check | Result | Reason |
|---|---|---|
| core.artifact | PASS | Admitted local USD dependencies; any runtime availability is caller-attested under the selected policy. |